SHOWTEC 42199 Guia do Utilizador

LED Light Bar 8 ORDERCODE 42199

8 One LED Light Bar 8 (Sound-control) 1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation. 2.

9 4. Link the units as shown in (figure 4), Connect a DMX signal cable from the first unit's DMX "out" socket to the second unit&apos

10 Control Panel When the indicator light is on, means the LED Bar is working. Fig. 5 A. LED Display D

11 Menu Overview

12 Main Menu Options DMX address Slave Sound controlled Color Built-in Programs Auto

13 1. DMX Mode With this menu you can set the DMX address. 1) Press the MODE button, until the display shows . 2) You can choose 51

14 4. Static Color Mode With this menu you can set the DMX address. 1) Press the MODE button, until the display shows . 2)

15 5. Built-in Programs Red Flash from 00-99 Red-Green Flash from 00-99 Green Flash from 00-

16 The specialty about menu 21 and 22 is, that you can combine both menus!!!! Example Menu 21 Menu 22

17 6. Auto Run Program 1) Press the MODE button on the device, until the display shows . 2) With this menu you can set the Auto

Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Light Bar 8 brings excitement to any venue. Whether you wa

18 14 DMX Channels (d-P3) Channel 1 – Red Section 1 0-255 Gradual adjustment Red from 0 – 100% Channel 2 – Green Section 1 0-255 Gr

19 26 DMX Channels (d-P4) Channel 1 – Red Section 1 0-255 Gradual adjustment Red from 0 – 100% Channel 2 – Green Section 1 0-255 Gradual adjust

20 Channel 18 – Blue Section 6 0-255 Gradual adjustment Blue from 0 – 100% Channel 19 – Red Section 7 0-255 Gradual adjustment Red from 0 – 100%

21 2 DMX Channels (d-P5) Channel 1 – Color 0-7 No Function 8-15 Red 16-23 Yellow 24-31 Green 32-39 Cyan 40-47 Blue 48-55 Purple 56-63 White 64-71

22 7 DMX Channels (d-P6) Channel 1 – Red 0-255 Gradual adjustment Red from 0 – 100% Channel 2 – Green 0-255 Gradual adjustment Green from 0 –

23 Maintenance The operator has to make sure that safety-relating and machine-technical installations are to be inspected by an expert after every fo

24 Problem Probable cause(s) Remedy One or more fixtures are completely dead. No power to the fixture • Check

25 Product Specification Model: Showtec LED Light Bar 8 LEDs: 240 RGB high intensity 10mm LEDs (Red 96, Green 72, Blue 72) Beam angle: 30 º Inexpens

1 Showtec Showtec LED Light Bar 8™ Product Guide Warning ...

2 Warning Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all

3 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized mod

4 Operating Determinations • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve

5 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly

6 Description of the device Features The LED Light Bar 8 is a LED system from Showtec. • LEDs: 240 RGB high intensity 10mm LEDs (Red 96, Green 72,

7 Backside Fig. 2 3) IEC Power In 4) Ground 5) Fuse 250V / 1A 6) Menu Buttons + LED display 7) DMX signal connec