Light Desk Pro 136 ORDERCODE 50433
8BacksideFig. 343) CF CARD socket It is for CF CARD operation.44) FOG MACHINE INPUT To connect with the fog machine.45) MIDI IN Used to
9Before you start programming, the console first has to be patched.Hold down the SETUP button (11) for 5 seconds, the green LED will illuminate.With t
10ChaseSelect the CHASE (2) you want to program. Make sure that the “chase” you want to program, is actuallyselected. By using the faders (4) you can
11Step Mix/sequenceThe MIX/SEQUENCE button (6) has the following options:1) MIX MODE In “mix”-mode the LED of the active “chase” blinks and the LED
12Press the SCENE (28) or CHASE (30) button, which has to be programmed. Set the faders (38) to thedesired position. The faders (41) have address 129
13One/mix/seq (31)1) ONE MODE When the “one” function has been selected, the last selected chase will run. The LED will be off.2) MIX MODE When
14SettingsEnter the setting modePress the SETUP button (11) for 5 seconds while no program running, relevant LED will light up.LCD will show you:
15PAN / TILT FADE ONLYEnter the setting mode to choose item “3. P/T FADE ONLY”, and press the RECORD button (15) to enter“PAN/TILT FADE ONLY” mode.Fur
16To clear the memoryTurn off the power, simultaneously holding down the Chase buttons 3, 6 and the Fixture buttons 2, 7, and atthe same time, turn on
17Removing the rubber housing for 19” rack fittingRemove the 4 screws (A, B, C, D) on the side and the 4 screws (E, F, G, H) on the top and bottom. No
Congratulations!You have bought a great, innovative product from Showtec.The Showtec Light Desk Pro 136 brings excitement to any venue. Whether you w
18Product SpecificationModel: Showtec Light Desk Pro 136Voltage : AC 230V-50Hz (CE)Power input: DC9 ~ 15V, 600 mA min.Audio trigger: Built-in Mic or L
2004 Showtec.
133455568888991010101010101011111111111111121212121212121212121313131313ShowtecShowtec Light Desk Pro 136™ Product GuideWarning..…...
2141414141415151515161617171718Settings...………...
3WARNINGFOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLYBEFORE YOUR INITIAL START-UP!SAFETY INSTRUCTIONSEvery person involved with the inst
4• If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely(preferably in the original packing material), a
5Description of the deviceFeaturesThe Light Desk Pro 136 is a lightcontroller from Showtec.• Hybrid console for 16 DMX units (8 intelligent fixtures &
6Frontside Fig. 21) SCENE buttons Press the scene buttons to load or store relevant Scenes.2) CHASE buttons These buttons are used to lo
7 this button to record Scenes or Chases.16) ESC button To cancel relevant operation or to exit.17+18) UP/DOWN buttons To select or adj
Comentários a estes Manuais